2D & 3D Drawings

(Product Layout Program)
See download instructions below.

3D Drawings

NOTE: All drawings are drawn to the dimensions stated in our bulletins with a tolerance of +/- 1/4”

Instructions for Downloading 2D Drawings

(Product Layout Program) for Use with AutoCAD:

After Clicking on the DOWNLOAD link, a dialog box will appear:

To Install:

Hard drive installation requires approximately 68 MB of free space. It will install on the hard drive as it downloads. (C:\Hansen\Hansen)

In the support files search path inside AutoCAD [Tools, Options, Files, Support File Search Path] specify the directory where the files are located . In the above typical installation, both C:\Hansen\Hansen and C:\Hansen\Hansen\Source must be separately listed as support file search paths.

To Run:

Load AutoLISP routines into AutoCAD [Tools, Load Application].
Type “HT” on the command line.
Make the appropriate selections in the dialog box that appears. A new dialog box apperas, with selections for the valve type you selected. PLEASE NOTE: Make selections from top to bottom.
When the dialog box is closed, specify a start (insertion) point and second point (specifying rotation only). The drawing block is inserted.

Note: If you are unable to use AutoLISP routines with your version of AutoCAD, drawings can be accessed directly via the downloaded folder directory.

Drawing Certification

Dimensions are based on the latest information available at the time of the publication, but are subject to change without notice. If a certified drawing is required, please contact the factory.

Disclaimer and Limit of Liability

Hansen Technologies Corporation makes no warranty of any kind, either expressed or implied, including, but not limited to implied warranties of merchantability and fitness for a particular purpose, with respect to this software and accompanying documentation. In no event shall Hansen Technologies Corporation be liable for any damages (including damages for loss of business profits, business interruption, loss of business information, or other pecuniary loss) arising out of the use of or inability to use this software, even if Hansen Technologies Corporation has been advised of the possibility of such damages. Installation of this software signifies acceptance of this agreement.

Copyright Notice and Trademarks

This product, including all supporting software programs, files and printed documentation, is copyrighted and all rights are reserved by Hansen Technologies Corporation. Unauthorized duplication and/or distribution is a violation of US copyright law and international copyright agreements.

Support: (800) 426-7368