Call
Products
Support
Portal

Support: (800) 426-7368

Easy Replacement. Low Blowdown. Maximum Protection.

EZ-SRV Cartridge Relief Valve

Hansen EZ-SRV Cartridge Pressure Relief valves protect refrigeration pressure vessels and other refrigeration system components from excessive pressure. If an abnormally high pressure occurs, the cartridge pressure-relief valve will open to relieve the excess pressure, preventing potential damage to equipment and injury to personnel.

EZ-SRVTM valves are built in strict conformance with both ASME Boiler and Pressure Vessel Code requirements and ISO 4126—Safety Devices for Protection of Excessive Pressure. Each valve bears the ASME code symbol of certi cation (UV) and CE mark. Valve capacities are rated by the National Board of Boiler and Pressure Vessel Inspectors (NB).
  • Cartridge design allows quick and easy replacement.
  • Matched capacities to existing Hansen H5600 “R” series
  • Low blowdown (15% or less) for gas service
  • EZ-Fitting is a permanent fixture, available with welded or threaded end connections
  • MPT inlet eliminates need for nipple
  • EZ-Adapter component available for retrofit of existing Hansen relief valves
  • Liquid Rated Relief Valve (EZLQ) available

Applications

Hansen EZ-SRV™ car tridge pressure-relief valves typically are installed on pressure vessels to protect from overpressure. Several design codes for refrigeration systems require that pressure vessels have protection from excessive pressure. For example, Hansen cartridge pressure-relief valves comply with the requirements of ANSI/ASHRAE Standard 15 Safety Standard for Refrigeration Systems, and ANSI/IIAR 2 Equipment, Design, and Installation of Closed-Circuit Ammonia Mechanical Refrigerating Systems.

Once installed, a properly selected Hansen E Z- SRV ™ cartridge
pressure-relief valve will vent to atmosphere excessive overpressure. After discharge, these valves will quickly reseat to minimize loss of refrigerant. After discharge, relief valves must be replaced as soon as possible because debris may have settled on the seat, allowing the seat to leak out refrigerant. Hansen EZ-SRV™ valves must be installed in the vapor space above the liquid level of any vessel or component which contains liquid and vapor. (Hansen offers the EZLQ, a liquid relief valve for use with ASME rated pressure vessels and is rated U.S. GPM.)